[China Glass Network] 1. The wire glass is packed in containers, pallets or wooden boxes. Each piece of glass is packed in plastic bags or paper. The glass and the box are filled with soft and soft materials that are not easy to cause glass scratches. Each box should be marked outside. The words "face up, care and care" and the thickness, size, type or trademark of the glass. Stitchbond CHAOZHOU TEAMWAY TEXTILE CO., LTD , https://www.teamwaychina.com
2. When transporting the wired glass, the glass shall not be laid flat or inclined, and the length direction shall be the same as that of the vehicle, and there shall be rainproof facilities. When handling the glass, avoid collision with hard objects to avoid damaging the glass. Temporarily unused products should be stored in a dry room, placed upright on the A-frame, tilted 5-100 from the vertical, and secured with a rope.
3. Before installing the wired glass, avoid the high temperature exposure, high temperature and rain and other climatic conditions. The glass at the construction site should be stored in a ventilated and dry place. When the weather changes suddenly and the rain is heavy, the construction personnel should check the site in time to prevent the glass packaging box from being immersed in water. Causes the water to change color at the edge of the wire glass.
4. The wire glass should not be installed wildly during the installation process, and it can be handled gently and evenly. The window frame should be made of high-precision, non-rusting products, and should be given full consideration of the difference in thermal expansion coefficient between the glass and the frame material. The size of the glass and the window frame should be matched, and the glass should be small and not large, but the depth of the glass bite and the depth of the window frame groove should meet the requirements. The four-sided frame is designed to be easy to quickly remove rainwater and dew condensation. Keep the glass dry.
5. The metal frame cannot be directly in contact with the glass. The glass and the frame should be filled with a high-quality sealing material, and the compatibility of the sealing material with the PVB film should be noted. Silicone rubber or polysulfide rubber sealing materials are recommended. Installation design and construction operations shall comply with the requirements of the national compulsory industry standard JGJ113-97 <Technical Regulations for Building Glass Applications>.