[China Glass Net] Car foil has become a popular fashion for car beauty decoration. Now almost all car owners will film for car, but even many car owners can not achieve the expected effect in the well-known brand store film, then it is a problem for technicians. ? Is it a poor quality film? This may be the opinion of many car owners. It is true that the level of technicians in the domestic automotive beauty decoration market is mixed, and the inferior solar film is flooding. Dr. Ming, who is a car beauty maintenance chain in Chi Nip, does not think that the quality of the solar film and the level of the technician can be the cause of the poor filming effect. However, the key solar film maintenance problem after the car filming is The reason that is often overlooked. So how to maintain the car film after filming? Maybe a lot of car owners after the film is finished, the technicians in the car beauty shop will remind some maintenance methods, but they are either imperfect or not systematic. More often, the owner did not pay attention to it at the time, and did not perform well in the later stage, which led to this key. The solar film installed after a few days has appeared such a problem. To this end, Dr. Ming, the car beauty maintenance chain of Chi Nip, summarized the maintenance methods for key days after car filming:
Polar Fleece Vest, the shell fabric is made
of fleece in 100% polyester. It's very soft ,comfortable and breathable ,
and keep the Body Warmer all the day. because it is very warm and breathable,
people always put on it as a layer for the outdoor. There are many styles for
your choice . Any color , any size, any styles, we can do
it. when you want to have a sport , you can wear it separately and fit
very well, very comfortable. we trust you will like it. if you are
interested in this kind of garments, please don't hesitate to contact to us ,
any color, any style, any
size,we can do it.
Fleece Vest Fleece Vest,Women'S Fleece Vest,Soft Fleece Vest,Fleece Vest Women Jinan Topline Trading Co., Ltd. , https://www.jinantopline.com
Try to avoid car washing within three days after the film is applied, so as to prevent the film from falling off due to moisture. The rear window defogging line should not be opened as much as possible within one week. If the moisture is not dry, it will easily cause adverse effects on the demisting line. Wipe the membrane surface with a wet towel, sponge or soft cloth after applying. In addition, after a filming, it will be found that there is misty water vapor inside. This is the normal phenomenon of the solar film during the dry process, and it will slowly disappear after a while.
Within a few days after the film is applied, the lifting window should be avoided as much as possible (especially the new car that has just been attached to the film). It takes 5-7 days for the solar film to be fixedly attached to the window, so the film edge is easy during the opening and closing of the window. Grinding curls, films that are not fully bonded are also prone to displacement. High-quality car film usually has good wear resistance. The special high-performance resin glue is used between the film layers. The adhesion is very outstanding. When the film is applied, the edge of the film and the edge of the glass are only 2 mm. Moreover, the anti-scratch coating makes it highly scratch-resistant and has a long life and is easy to maintain. On weekdays, the lift window is also easy to wear the film surface. Inferior film will be scratched after one or two months. Choosing a good quality film can avoid this situation.
If you accidentally loosen the film during car wash, return to the professional film shop to re-fix the professional to ensure the effect and durability. If there is stain on the film surface, do not use chemical solvents. It is better to clean it with a wet towel, paper towel or cotton cloth with detergent, or use a rubber wiper to clean it. However, avoid the use of abrasive objects and tools that can scratch or damage the film to avoid damage to the solar film. Expert suggestion: After the film is applied, try not to stick or hang things directly on the window, so as to avoid pulling the film out when the suction cup and the sticker are pulled out.