Amber has been buried in the deep sea and underground for tens of millions of years and has been protected by nature. When they are excavated or washed ashore, the rate of evaporation and oxidation in the air will increase. If they are exposed to air for a long time, the color of amber will be deepened by the sun, and the surface of the water will be cracked. If it is serious, it will affect the ornamental of the inside. In addition, the peeling and polishing of the amber outer waxing layer increases the glossiness, and sometimes it also poses a hazard to the long-term collection of amber, because some waxes contain chemical components for cleaning. Everyone knows that except for the hardness of Burmese amber, the hardness of other amber is relatively low, so what should we do during maintenance? I have said that the best maintenance method is long-term wear, because the human body The oil produced every day can make the amber brighter and brighter. 1: Since the hardness of amber itself is low, then we should not store sharp jewelry such as amber and diamond, and store it separately. 2: Be sure to avoid the bumps and falls of the goods, so the damage to the amber will be very large. 3: If you haven't worn it for a long time, don't use a toothbrush or the like to brush the surface of the amber. Because the friction will make the surface of the amber rough and lose the original luster, it will not be worth the loss. Our correct approach should be Amber is soaked in warm water of 30-40 degrees for 2-3 minutes, then remove it and dry it with a soft cloth. 4: Try to avoid the illumination of strong light. The general sunlight and the illumination of the light are completely no problem. Because the melting point of amber is relatively low, if there is fire around, do not let amber contact it at close range. 5: If the amber is rough due to friction, then we should have a little toothpaste on the surface, then wipe it with a soft cloth, and finally clean it with a soft cloth with water, then apply a little olive oil on it to restore the original Some are shiny. The so-called old beeswax refers to a kind of beeswax with a certain year, which may be the preserved beeswax raw material, or it may be the waxy old object that has been handed down. In either case, they must have a certain history, with traces of years. This old beeswax has a rich sense of jade, a strong oily luster, and a sense of warmth. Almost all old beeswax has this feature. The reason is that because of the long-term natural conditions, there will be a kind of oily substance on the surface of the beeswax, which will wrap the whole beeswax, which is usually referred to as patina. . This material is the most direct feature of distinguishing old beeswax from new beeswax. The amount of old beeswax that has been preserved so far is very rare, and it is showing a downward trend every year. This precious old beeswax needs special maintenance, so that it can continue to be passed down. What are the maintenance methods of old beeswax? 1. The old beeswax has low hardness and cannot be violently collided with other hard objects, otherwise it is easy to break the old beeswax. The purification of old beeswax is very important, that is, all the old beeswax is washed once, with water, it is better to add some salt in it, soak it in water for fifteen to half an hour, take it out and use it soft. Dry the cotton cloth. 2. In order to make the surface of the old beeswax more attractive, you should always wear it or hold it in your hands. Of course, keep your hands clean when you play. It is best to have no sweat on your hands. Long-term wear or play will make you old. The bevel of the beeswax is thicker and brighter, making it more oily. Female Casual Mini Skirts,High Waist Miniskirts,Women`S Miniskirts,A-Line Miniskirts Shaoxing Ayura Clothing Co., Ltd , https://www.sxayura.com
